Step by step instructions for the perfect installation of your 450 stars!
This guide is based exclusively
on the quality of the sets from www.Bimmer-Garage.de !
Because we do not accept liability for poorly manufactured, cheap sets of rifles, which could be responsible for a dangerous fire!
We assume that the headliner has been removed and we can get to work.
Using a 2mm drill bit on a cordless screwdriver, 450 holes must now be drilled into the fabric. We recommend marking these beforehand with a permanent marker to ensure the desired distances or even patterns are maintained.
Place the projector box in the front area approximately under the light switches.
From there, the cabling should now start to spread.
The individual links must now be threaded through the holes one by one and pulled through as far as possible in order to be able to reinstall the ceiling with a precise fit.
Using a hot glue gun, each completely pulled-through link is glued from above.
Then you cut off the downward-hanging links from the lower side (e.g. with a small side cutter) flush with the ceiling.
Now for the power connection:
We recommend cutting off the power cable and soldering the whole thing to the power connection on the upper interior lighting.
We wish you much success and fun installing our Premium Set .
Further products are available at www.Bimmer-Garage.de