First of all, the specially manufactured and high-quality trunk springs from www.Bimmer-Garage.de required.
IMPORTANT INFO
Opening is too 66% depends on the dampers and the springs contribute to 33% at.
This means that for a completely automatic opening, a well-functioning or new damper on the trunk is necessary.
Installation instructions for your trunk springs
First of all, open the trunk.
The dampers are now on the left and right.
Loosen the fastening clips at the top and bottom of the left damper using a flat-head screwdriver, which you should have in the tool compartment of your tailgate.
Now the damper can be removed by pulling it off.
The lower plastic piece must now be removed in order to put the spring on it.
Hold the damper rod with a pair of pliers (found in the tool compartment of the tailgate) and insert the screwdriver into the hole in the removed plastic piece.
Now you can unscrew the screwdriver and thus the plastic piece anti-clockwise.
We recommend placing a suitable washer above and below the spring and now you can put the spring on the rod.
Now the plastic connection is screwed back on and installed the other way around to protect the lower brackets.
The same thing repeats itself on the other side.
Thank you for your purchase at www.Bimmer-Garage.de
Best regards
Your Bimmer-Garagen Team