Free shipping in the shopping cart

Installation videos on YouTube @Bimmer-Garage

DIY: Oil change on the BMW E46 – step-by-step instructions for optimal engine care

DIY: Ölwechsel beim BMW E46 – Schritt für Schritt Anleitung für eine optimale Motorpflege

Zara Paffendorf |

Regular oil changes are crucial to extend the life of your BMW E46 's engine and maintain its performance. In this DIY blog post, we'll show you a detailed step-by-step guide to a successful oil change so you can take engine care into your own hands and give your vehicle the attention it deserves.

We also have a detailed YouTube video that can help you.

Step 1: Prepare materials and tools

Before you begin, make sure you have all the materials and tools you need:

  • Fresh engine oil according to the manufacturer's instructions
  • New oil filter
  • drip tray
  • ratchet set
  • oil filter wrench
  • funnel
  • oil filter wrench
  • gloves and safety glasses

Step 2: Prepare the engine

Start the engine and let it run for about 5 minutes. A warm engine will allow the oil to drain more easily and take more deposits with it.

Step 3: Jack up the vehicle and place the drip tray

Lift the vehicle safely and place the drain pan under the oil drain plug located on the lower part of the engine.

Step 4: Drain the oil

Loosen the oil drain plug with the ratchet set and let the old oil drain into the drip pan. Make sure that the oil drains completely before tightening the plug again.

Step 5: Replace the oil filter

Use the oil filter wrench to remove the old oil filter. Screw on the new oil filter by first putting some fresh oil on the sealing ring.

Step 6: Add fresh oil

Find the oil filler hole , remove the cap and insert a funnel. Add the fresh oil according to the manufacturer's instructions. Check the oil level with the dipstick to make sure you have added the correct amount.

Step 7: Start the engine and check the oil level

Start the engine for a few minutes and check the oil level again. Top up if necessary until the oil level is in the optimal range.

Step 8: Dispose of used oil and oil filter

Dispose of used oil and oil filter properly at a local waste oil collection point.

Conclusion: Engine care in your hands

Congratulations, you have successfully performed an oil change on your BMW E46 ! By regularly performing this DIY maintenance step, you will help maintain engine performance and improve the driving experience.

Visit the Bimmer-Garage website for high-quality products and further tips on vehicle maintenance. Because when it comes to care, your BMW E46 deserves only the best.

logo-paypal paypal